Improve Safety, Grip & Visibility with Poly Prime Anti Slip Glow Tape

Poly Prime Anti Slip Glow Tape is designed to provide strong traction and improved visibility on stairs, floors, walkways, ramps and other areas where slipping can be a concern.

Featuring a high-grip abrasive surface with a bright glow strip, this safety tape helps improve foot traction while making edges and pathways more visible in low-light conditions.

The tape is suitable for a wide range of indoor and outdoor applications and can be applied to commonly used surfaces such as wood, concrete, metal and tiles, provided the surface is clean, dry and suitable for adhesive application.

Key Features

• High-Grip Anti-Slip Surface – Provides enhanced traction for safer movement.
• Glow Visibility – Glow strip helps improve visibility in dark or low-light areas after exposure to light.
• Strong Adhesion – Designed to provide a secure bond on suitable clean and dry surfaces.
• Durable Abrasive Surface – 80-grit aluminum oxide texture for reliable grip and wear resistance.
• Indoor & Outdoor Use – Suitable for stairs, floors, walkways, ramps, decks and other applications.
• Water-Resistant – Designed for applications where exposure to moisture may occur.
• Easy to Apply – Simply clean and dry the surface, measure, cut and apply.
• Ready-to-Use Roll – Convenient 2-inch width and 16.4-foot length.

Applications

Ideal For:

• Staircases & Steps
• Indoor & Outdoor Floors
• Walkways
• Ramps
• Ladders
• Decks & Docks
• Garage Floors
• Workshops
• Industrial Areas
• Commercial Premises
• Poolside Areas
• Entryways
• Loading & Working Areas
• High-Traffic Areas

How to Use

1. Make sure the contact surfaces are flat, clean, and dry when you apply the tape.

2. Cut the tape to the desired length and round off the corners with scissors.

3. Peel off the protective paper and place the tape in the desired position. (If the temperature is low, please warm it up slowly with a hair dryer and stick with good results)

4. The pressure is applied evenly from the center of the tape to both ends. (Wait for 24 hours)

5. Expose the tape to a light source for a while to keep it glowing in the dark.

Other Tips

The tape absorbs 30 minutes light source can be light for some time. (The more light is absorbed, the easier and longer lasting, then slowly weakened)

If the light stripe fades, don't worry, it will be quite bright soon after "charging" with light.